Search Results

Singer Sewing Machine Sewing Machine This tool can be used by members and non-members who are well-versed in the operation of the tool. Trainings can always be requested at #class-requests on Slack Model NoCG550C Date Purchased— StatusOperational ...

Central Machinery Bench Buffer Bench Buffer / Polisher This tool can be used by members and non-members who are well-versed in the operation of the tool. Trainings can always be requested at #class-requests on Slack Model No226002 (item 94071) Date...

USCutter PrismCut P28 Vinyl Cutter This tool is restricted to Makerspace Members, and requires a training before use. Request a training on Slack: #class-requests Model NoP28 Date Purchased— StatusOperational Link To ManualPrismCut specs (USCutte...

Sears Roebuck Serger Serger This tool is restricted to Makerspace Members, and requires a training before use. Request a training on Slack: #class-requests Model No385.16644690 Date Purchased— StatusOperational Link To ManualManualsLib (search mo...

Sailrite Ultrafeed Industrial Sewing Machine This tool is restricted to Makerspace Members, and requires a training before use. Request a training on Slack: #class-requests Model NoLSZ-1 Date Purchased— StatusOperational Link To ManualUltrafeed L...

AmScope Stereo Microscope Microscope This tool can be used by members and non-members who are well-versed in the operation of the tool. Trainings can always be requested at #class-requests on Slack Model NoTBD (10×–40× stereo, analog) Date Purchase...

GraverSmith Pneumatic Engraver Pneumatic Engraver This tool is restricted to Makerspace Members, and requires a training before use. Request a training on Slack: #class-requests Model NoGraverSmith (GRS 005-895) Date Purchased— StatusOperational ...

Foredom Rotary Tool Flex-Shaft Rotary Tool This tool is restricted to Makerspace Members, and requires a training before use. Request a training on Slack: #class-requests Model NoHP4-917 Date Purchased— StatusOperational Link To ManualForedom doc...

Pulse Arc Welder Pulse Arc Welder This tool is restricted to Makerspace Members, and requires a training before use. Request a training on Slack: #class-requests Model NoPulse arc (see listing) Date Purchased— StatusOperational Link To ManualRefe...

Lincoln Weldpak 180HD MIG Welder This tool is restricted to Makerspace Members, and requires a training before use. Request a training on Slack: #class-requests Model NoWeldpak 180HD (K2515-1) Date Purchased— StatusOperational Link To ManualLinco...

QX A1 Heat Press Heat Press This tool is restricted to Makerspace Members, and requires a training before use. Request a training on Slack: #class-requests Model NoQX A1 (15×15 in) Date Purchased— StatusOperational Link To ManualPDF (15×15 clamsh...

← Back to Onefinity hub Software: VCarve and RTS-X Getting Access Request CNC training on Slack: #class-requests Complete the CNC checkout/training class After checkout, an admin sends your Vectric/V&Co Makerspace invite so you can use the VCarve client edit...

← Back to Onefinity hub Hardware and Machine Anatomy Manufacturer Specifications (Gen 2 Foreman) Cut area: ~49" × 49⅞" (1245 × 1248 mm) Z travel (Z-20 slider): ~165 mm (~6.5") Gantry clearance: up to ~160 mm depending on Z-slider mount height Motion: closed-...

← Back to Onefinity hub Preparing a Cut File Design at Home Checklist Confirm project units (inches vs mm) - must match your post-processor choice Set up the correct machine profile in VCarve (per the Onefinity + Vectric setup guide): VCarve → Machine → Mac...

← Back to Onefinity hub Running a Job Follow this checklist every time you run a job. Complete Preparing a Cut File and have your G-code on the shop PC before starting. Before Power-On (Safety-Critical) Install and tighten the bit first - before any spindle ...

← Back to Onefinity hub Speeds and Feeds Use this page as a reference when setting up toolpaths in VCarve. Start conservative - increase feed rate only after successful test cuts on scrap material. Match RPM to material type and bit diameter. 1.5kW spindle li...

← Back to Onefinity hub Safety Rules Read this before operating the machine. These rules apply every time you use the Onefinity CNC - no exceptions. Training required - members only; request class on Slack #class-requests Never leave the machine unattended w...

← Back to Onefinity hub Maintenance and Troubleshooting Maintenance Collet: Clean and inspect regularly; replace if worn or damaged Spoilboard: 3/4" board - monitor thickness as holes and resurfacing accumulate; resurface when uneven Dust collection / dust s...