Safety Rules

← Back to Onefinity hub 
 Safety Rules 
 
 Read this before operating the machine. These rules apply every time you use the Onefinity CNC - no exceptions. 
 
 Training required - members only; request class on Slack #class-requests 
 Never leave the machine unattended while cutting 
 Approved materials: wood and plastics only - no metals 
 Dust and chip hazards; fire risk from fine wood dust - especially important until dust collection is installed 
 E-stop stops machine motion and spindle; does not shut down the shop PC 
 Wear safety glasses; hearing protection recommended 
 
 
 ← Hub 

|

 Next: Hardware and Machine Anatomy →